[New Release] Wall Hack
1. Log into Perfect World, and load up and log into a character.
2. Run PWGTxxxx.exe (as Administrator on some systems, Vista especially).
3. Activate the Perfect World window you want to use PWGTxxxx with (you have 30 seconds). The window must be named "Element Client" for it to hook, titles like "Element Client blah blah whatever" might work too, but this has not been tested by myself.
4. PWGTxxxx will beep twice to let you know its got a hook on your client.
5. On the first time you load, the program will ask for the base address in Hex format of your version of PW, possible known working base addresses are,
PW MY EN
PW MY EN Private Servers
PW PH (thanks to edmark20)
PW IN (thanks to BetaBowElfe)
PW RU (many thanks and apologies to Owyn)
PW BR (thanks to mhsgames)
If none of these work, please try this guide to find it yourself:
1.Open up your CE and target Elementclient.exe
2.Search for your current HP value
3.Do a couple of search by changing your HP value till you obtain 1 or 2
.double click it to move it down yo your table and right click on it.
right click on it and choose find out what writes on this address(it
might takes a while but try changing the HP while finding might speed
5.After u got your results choose it and click on more information
6.see that ESI+00000450.DO remember the 450 it
will the your offset for HP.
find out what ESI stands for by checking the table down there
for me its 1b1b9048<------will be different since it supposed to be
7.Search for the pointer tht u found previously.Remember to tick HEX
8.you will probably get more than one result. Just take the first
click on add address manually then tick pointer insert the address u
found and the offset
9.right click on the address you added just now and choose find out what
accessed this address
a window will pop up since its a pointer then click on find out what
accessed this pointer
10.again bunch of results pop up again select the first one and click on
11.like what u saw on step 6 REad the highlighted line. this time the
offset is 20
Search for edi which is 03fc9a28<----again might different from each
12.Search for 03fc9a28 in HEX. see that green
static address thats your base address
Enter in one of the above (or your own) base address. Please do not put
"0x" in front of the Hex value, just put the values in like the above
6. A window will pop up advising you that it is about to scan the
memory. Press "Ok" and then do nothing! The program will bring Perfect
World into focus, and then you will see your character jump. It will
take about 5 seconds for it to finish.
Please note, you have to be in an open area so that the memory scanner
can find the jump in time (don't do it in fb / dungeon / in a hut /
under a rock / dead).
7. After 5 seconds it will finish and tell you that its ok to try the
program now. If you get an error message it will ask for the base
address again. It should only error if the base address is wrong, if the
number entered is more than an 8 digit Hex number, its not a Hex
number, or it contains "0x". It also might not be storing the values in
the PWGTM.ini file correctly (check the ini file, see if there is any
numbers written after the "Offsets" key).
8. After the PWGTM.ini file has been created, the following commands
will work. Please test that it works as it should.
NUMPAD 8 - North
NUMPAD 2 - South
NUMPAD 6 - East
NUMPAD 4 - West
NUMPAD 7 - Up
NUMPAD 9 - DOwn
ALT + NUMPAD - move double the distance
CTRL + NUMPAD - move triple the distance
F10 - Exits Program
North, South, East, and West will make your character move in those
specific directions. For example, if you are facing South, and you pick
North (default NUMPAD 8), you will go North (which is actually backwards
in this case).
Be careful using any kind of hack, always test it out on a noob / hack
accoun (especially after any patches), no fun getting your main account
You can give your working PWGTM.ini file to anyone that may be having
problems. Just make sure it is in the same directory as the program
If you connect to different country servers alot, you can copy
PWGTMv1.8.exe into different directories. This will keep your settings
for each server in a different folder so you wont have to update it all
the time, for example,
PW MY EN
C:\PWGT PW MY\PWGTMv1.8.exe
|[New Release] Wall Hack Downloads|
|File Name||File Size||Download Link|
|You need to be logged in to download files.|
Credits for [New Release] Wall Hack
[New Release] Wall Hack Discussions
|Title||Started By||Replies||Last Post|
2 years ago
|THIS GUY DOESNT EVEN MAKE HACKS||bignegro999||3||
2 years ago
2 years ago
|View All [New Release] Wall Hack Discussions|