Everquest Basics

Mq2AdvBeep
-This plugin allows you to take full advantage of the wonderful beep command in game.

Code:

Commands:
Music Mode:
/advbeep [note] [length] [octave]
Normal Mode:
/advbeep [frequency] [length]

Possible notes: c, csharp, d, dsharp, e, f, fsharp, g, gsharp, a, asharp, b

Mq2AutoClip
-Automatically set clipping plane, saved to ini, depending on zone.

Code:

Commands:
/clip set | set <min> <max> | del | show
/clip <min> <max>

Examples:
/clip show - displays clipping plane min/max for current zone
/clip set - sets the currently saved (or default) clip min/max for current zone
/clip set 100 500 - sets the clip to min 100 max 500 for current zone, and saves to ini
/clip del - deletes the saved clip settings for current zone from the ini
/clip 200 1000 - Temporarily sets current clip to min 200 max 1000 (does not save to ini)

Help:
/clip

Mq2AutoDestroy
-This plugin can be used to automatically keep or destroy items as they appear on the mouse cursor

Code:

Commands:

/autodestroy - Object held on the mouse cursor will be added to the
INI file's [AutoDestroy] section
/autodestroy auto - Toggles automatic destruction of items listed in the
[AutoDestroy] section of the INI file as they appear
on the mouse cursor
/autokeep - Object held on the mouse cursor will be added to the
INI file's [AutoKeep] section
/autokeep auto - Toggles automatic keeping of items listed in the
[AutoKeep] section of the INI file as they appear on
the mouse cursor
/handlecursor - Keep or destroy the item on the cursor, depending on
which section of the INI file it appears in

Mq2Autoforage
- INI driven autoforaging

Code:

/startforage - commence autoforaging.
/stopforage - stop autoforaging.
/keepitem {item} - add/change the item in the .ini file to auto-keep.
/destroyitem {item} - add/change the item in the .ini file to auto-destroy.

Mq2AutoGroup
-Will automatically accept you into a group/raid based off of the names added into a INI file. If these names invite you, your toon will auto join the group/raid.

Code:

Commands:
/plugin mq2autogroup

*INI code*
[Settings]
AutoGroup=on
[Names]
Name0=bob
Name1=fred
Name2=harry

Mq2AutoRez
-Takes Rez and Loots Corpse

Code:

Commands:
/autorez accept [on|off]
-- (on) you get a rez box you will take it after 2 seconds. clicking spawn if needed.

/autorez spawn [on|off]
-- (on) you will immediately click the spawn to bind after death.

/autorez loot [on|off]
-- not finished -- if on loot items from corpse after clicking rez.

Mq2AutoSkills
-Auto-activate various skills

Code:

Commands:
/autoskills help - lists options
INI file will be auto-created, MQ2AutoSkills_Charname_server.ini
Syntax is simply Skill=on/off and MeleeRange=distance
Currently suported skills:
Backstab, Bash, Begging, Disarm, Dragon Punch, Eagle Strike, Flying Kick,
Frenzy, Evade, Forage, Feign Death, Intimidation, Kick, Mend, Pick Pockets,
Round Kick, Sense Traps, Slam, Taunt, Tiger Claw

/attack off on mob ENRAGE/infuriate is also supported, treated as the "ENRAGE" and
"infuriate" skills in the INI.
Known issues: Trade/Vendor windows and possibly some other events may cause some
skills to fire when not appropriate and spam you

Mq2Bandolier

Code:

USAGE

/createset <setname> slotname1|slotnumber slotname2|slotnumber2 ... (slotname21|slotnumber22)
Creates a set in MQ2Bandolier_<CharName>.ini using the selected equipment slots. If you use the name of an existing set, it will be over-written.

/deleteset <setname>
Deletes the specified setname from the characters ini.

/equipset <setname>
Equips all items of the specified set.


Example:


/createset ThisSet chest mainhand offhand
/createset ThisSet 17 13 14


Both of the above examples will create the following ini entry:


[ThisSet]
17=12345
13=23456
14=34567

--------------

/deleteset ThisSet
Deletes the ThisSet section in the ini

/equipset ThisSet

Mq2BardSwap
-Swap in instruments as needed

Code:

Commands:
/bardswap - toggle swapping off and on
/bardswap melee - toggle using "Melee swap" delay

Mq2BoundTLO
-Adds Information on the location you are bound
Code:

none

Mq2BuffBlock
-Clicks off unwanted buffs (Beneficial buffs ONLY)
Code:

Commands:
/block "buffname" - blocks that buff
/unblock "buffname" - unblocks that buff
/block list - lists all buffs currently being blocked

Mq2Bzsrch
-Bazaar search plugin
Code:

Commands:
/bzsrch [params] [name]
params:
[race any|barbarian|dark elf|dwarf|erudite|froglok|gnome|half elf|halfling|high elf|human|
iksar|ogre|troll|vah shir|wood elf]
[class any|bard|beastlord|cleric|druid|enchanter|magician|monk|necromancer|paladin|ranger|
rogue|shadow knight|shaman|warrior|wizard]
[stat any|armor class|agility|charisma|dexterity|intelligence|stamina|strength|wisdom|vs cold
|vs disease|vs fire|vs magic|vs poison|hit points|mana]
[slot any|ammo|arms|back|charm|chest|ear|face|feet|fingers|hands|head|legs|neck|primary|range|
secondary|shoulders|waist|wrist]
[type any|1h slashing|1h blunt|2h blunt|2h slashing|2h piercing|alcohol|all effects|armor|
arrow|bandages|book|bow|brass instrument|combinable|drink|flowing thought|focus effect|food|
haste|jewelry|key|light|martial|misc|note|percussion instrument|piercing|potion|scroll|shield|
stringed instrument|throwing|wind instrument]

/pricecheck - Does an item price check.

Example:
/bzsrch wedding ring
/bzsrch race any class any plate | search for plate armor for anyone
/bzsrch plate | search for plate for me
/bzsrch slot fingers stat "armor class" | look for a ring with armor class
/bzsrch price 0 100 type "flowing thought" | look for some flowing thought
| stuff, ya cheap bastard

Mq2Cast
-Plugin based cast handler, with built in timer function.
Code:

/casting [name|[alt|gem#|slotname|item]] [alt|gem#|slotname|item]

-invis : Checks if your incis
-focus|itenmane|slotname : Swarp up to 5 focus items in and out
-targetid|# : cast spell on # Spawn.ID
-recast|# : recast # times
-kill : Cast spell on target untill dead.
-maxtries|# : Max retry's when interupted / resist ect ..
-setin setname : Require MQ2Bandolier swarp's set's in and out
-setout setname : Require MQ2Bandolier swarp's set's in and out

/memorize [SpellName] [gem#] : Try to memorize spell name or spelled into specified gem#. (If no gem
is given Gem 5 going to be used as default). If you're currently moving, mq2cast will try to stop
movement and start casting within 3 seconds or it will give an error.
/interrupt interupt / dismount if enough time
${Cast}: See Cast Members

MQ2CastTimer
- Addon For MQ2Cast

MQ2ClearMQ
- Clears MQ window
Code:

/clearmq

MQ2CustomBinds
- Allows you to specify custom commands to execute on a key combination
Code:

Commands:
/bind command key - Binds a key to that command (example "/bind INSTANT_CAMP SHIFT+C" will make
you instantly camp when you hit shift+c)

MQ2DoCrack
- Allows you to edit memory offsets from MQ2DoCrack.ini.
Code:

Commands:
/docrack [<docrack name> (on|off)]
/docrack list (For the full list/abilities please refer to the first post in this thread)

MQ2DoCrackN
- Used if you do not wish to use the added xml UI window.
Code:

Commands:
/docrack [<docrack name> (on|off)]
/docrack list (For the full list/abilities please refer to the first post in this thread)

MQ2EQBugFix
- Used To Fix EverQuest Coding Errors To Prevent Crashes. Default MacroQuest2 Plugin.

Mq2FunnyNames
-This plugin allows you change your target's name. NOTE: this is client side only.
Code:

Commands:
/funnyname newnamehere - sets your target's name

MQ2HUD
- Head up display
Code:

Commands:
/defaulthud - Loads the default HUD
/hud normal| underui| always - Adds additional functionality to the MQ2 HUD
/loadhud hudname - Loads a HUD with the name hudname from the ini

Mq2BoundTLO
-Adds Information on the location you are bound
Code:

none

Mq2ICamp
-allows you to instant camp
Code:

Commands:
/icamp -- camps you to char select
/icamp server -- camps you to server select
/icamp Desktop -- camps you to desktop

MQ2Targets
- Spawntracker with notify and run-time modifiable HUD display. Uses same syntax as the /where command.
Code:

/watch add guild
- Show everyone in your guild in current zone
/watch add damlin lingering npc
- Show when damlin in CoA pops
/watch remove damlin lingering npc
- Remove damlin from HUD tracking
/watch list
- Lists the current targets being watched for in current zone
/watch show 10
- Change the HUD display to track the 10 nearest targets
/watch x 200
- Display the leftmost edge of the HUD list at screen x position 200
/watch y 50
- Display the topmost edge of the HUD list at screen y position 50
/watch increment 20
- Change the spacing between spawns in the HUD to 20 pixels
Features:
- Search strings are saved per zone
- Replace "add" with "notify" and it will do a popup for each spawn
matching your search string
- Can add as many search strings per zone as needed
- Each HUD spawn matching the search shows distance, Z
above/below, direction, and an arrow showing relative direction
- Default is 5 spawns show, can modify using "/watch count <NUM>"
- HUD will highlight spawn if it's the current target
- Guild members highlighted in HUD
- HUD list sorted by distance ascending

MQ2Telnet
- Telnet Server
Code:

You must enable the telnet server in mq2telnet.ini's [Telnet Server] section. Set a valid Port=### and
in the [Users] section, add <USER>=
, where <USER>and
are the username and password you need enter to access the telnet server. Also, please set a "Welcome=message"

Using telnet Use a real telnet client. (Putty works well for this)
Connect to the system running EQ/MQ using the port you have in your ini. You should see your Welcome
message and a password prompt. (Enter it ;)
Anything you type into the telnet session will be sent to the client and executed directly (like a macro statement)
Any chat output will be sent to your telnet session.

/telnet
Displays a list of all remote IP addresses for open telnet sessions.

MQ2Timer
- This plugin allows you to have a window that gives you timer countdowns for events.
Code:

Commands:
/mqtimer - ?
/timerlist - ?
/targetNotAffectedBy - ?

MQ2TimeStamp
- Insert a timestamp into incoming chat.
Code:

Commands:
/timestamp [ help| on | off | reload | default | format <format> | loc <0|1> | maxlen <length> ]
Will toggle on/off with no arguments
help - displays usage information
on/off - enables/disables timestamps
reload - reloads the ini file
default - resets your format to default(only changeable via ini)
format - sets your timestamp format to <format>
loc - sets timestamp location: 0-append, 1-prepend
maxlen - sets the maximum length of parsed timestamp.

MQ2Tracking
- Provide a similar tracking window to the one used by native tracking characters
Code:

Commands:
/track [off|help|target]
/track refresh [on|off|toggle|<TIME seconds in>]
/track filter [off|<SPAWN search string>]
/tracknames [<VALUE>|reset]

MQ2TributeManager
- This original MQ2 plugin adds a /tribute command in game with automatic
tribute status management capabilities.
Code:

Commands:
/tribute < auto | manual | on | off | forceoff | enabledetrimental | disabledetrimental | show | savesettings >

Options:
auto: Automatically turn tribute on/off as you go in and out of combat. If you enter combat and tribute
is not on, it is activated immediately. If you are not in combat when the tribute timer is going to expire,
tribute is deactivated.
manual: Do not automatically turn on/off tribute. (default)
on: Turn on tribute but do not change auto/manual state.
off: Turn off tribute when current time left is going to expire. This option should not be combined with
other options that change the operation mode.
forceoff: Turn off tribute immediately, ignoring any remainder of current time left.
enabledetrimental: Enable turning on tribute when casting a detrimental spell and in automatic mode.
enabledetrimental: Disables turning on tribute when casting a detrimental spell and in automatic mode. (default)
savesettings: Saves current settings to INI file (which will be loaded the next time the character logs in)
show: Show the current mode.

Multiple options can be passed as one command.
Example:
/tribute on auto
would turn the tribute on immediately and would automatically manage the state from then on.
(ie, good before engaging a big named)

MQ2Twist
- Bard Song Twisting Plugin
Code:

Commands:
/twist # # # # # - Twists in the order given.
Valid options are 1 thru 8 for song gems, and 10 thru 19 for item clicks.
These may be mixed in any order, and repeats are allowable. Up to 10 may be
specified.
If a song is specified with a duration longer than standard (ie, selos)
that song will be twisted based on it's duration. For example, riz+mana+selos
would be a 2 song twist with selos pulsed every 2.5 min.

/twist hold <GEM #>- Pause twisting and sing only the specified song
/sing <GEM#>- alias for /twist hold
/twist stop/end/off - stop twisting, does not clear the twist queue
/stoptwist - alias for above
/twist or /twist start/on - Resume the twist after using /twist hold or /twist stop
/twist delay # (10ths of a second, minimum of 30, default 33
/twist reload - reload the INI file to update item clicks
/twist slots - List the slots defined in the INI and their #'s

MQ2ViewPort
- Resets your viewport to 0,0,1,1 (black screen) on any background running EQ session.
Resets it back to normal when it's the active window.
Code:

Commands:
/autovp - Toggles resetting background view on and off.

MQ2XPTracker
- Reports to your window exact xp made on each mob.
Code:

Commands:
Usage: /xptracker - Display time tracking was started.
/xptracker reset - Reset all events and begin tracking as if plugin was just loaded
/xptracker total - Display total gains since tracking start
/xptracker quiet - Toggle output of tracking messages
/xpevents - list the events/timestamps of the events we've tracked
/xpevents [#] - lists the events tracked in the past [#] seconds
/xpaverage - lists the average (mean) xp per-kill

Code:

New Commands
----------------------
Source Exchange
----------------------
/exchange (exchanges your money from anywhere... aka 13 gold goes to 1 plat 3 gold)
/exchange auto (this makes it so it auto changes your money around as you get it)

----------------------
Source Mem
----------------------
/memspell (instant mem a spell)
/memset (instant mem a spellset)

Also Plugins such as :
PC2Safety
This allows you to have FULL PROTECTION WITH MACROQUEST!!! IF PC OR ANYONE ENTERS THE ZONE IT WILL AUTOMATICALLY DO WHAT EVER YOU WANT INCLUDING /UNLOAD /GATE /GK OFF IT IS SIMPLE!!

/plugin mq2pc2Safety
/pc2safety help - for list of commands.